Polysulphide Sealant

Product Details:

Product DescriptionShaliSeal® PS PG is two components, polysulphide polymer based, UV resistant, flexible tear resistant, rubbery, self-leveling, pourable, non-staining sealant, which adheres to most of building materials like cementitious substrates, aluminum, glass, wood, mild steel etc.ShaliSeal® PS PG cures at ambient temperature, has excellent recovery characteristics after extended period of compression / elongation with outstanding resistance to most chemicals, weather conditions, aging and shrinkage.It conforms to BS 5212: 1990 Part I -Type F & Type FB (Flame and Fuel Resistant), IS 12118 Part 1 – 1987, BS:4254 and ASTM C 920 and BN EN 14188- 2:2004.

Application

• Joints in concrete roads, bridges, subways, flyovers & airport runway.• Joints in water retaining structures like water tank, swimming pool including decks, aqua ducts, dams, canals & reservoirs.• Expansion joints in industrial, commercial or residential buildings.• Nuclear Power station reactor domes.• Joints between concrete pipe lines.• Roof light joints.

Advantages

• Excellent UV resistant.• Provides uniform, water tight seal.• Adhesion compatible to most substrate.• Highly resilient with excellent recovery characteristics and thermal flexibility.• Prevents cracking by allowing expansion / contraction during atmospheric changes.• Flexible, tear resistant, rubbery, self-leveling.• Chemical / flame / fuel resistant.• After full cure Can withstand in fully submerged condition, and  The Sealant is suitable for potable water as well.Application Methodology

Surface Preparation

• Remove all loose gravel, dirt, oil, grease and foreign matter by jet of dry air and clean the surface mechanically or by grinding to make it smooth before application.• Ensure that the moisture content in the prepared surface does not exceed 5% immediately before application of ShaliSeal® PS PG.• To avoid adhesion of spill-over material beside joint, use masking tape at floor level beside both sides to get sharp edged neat and clean joint.• Use back up material to avoid third face adhesion and to avoid contact between joint forming board & sealant.• Use primer on vertical side faces of the joint to ensure strong bonding between substrate and sealant.

Material Preparation

• Mix the entire quantity of Base and Accelerator compounds, which are pre-weighed, thoroughly to a homogenous and uniform grey compound by a slow speed mixture (approx. 400 rpm) fitted with a suitable mixing paddle.• Ensure that there is no entrapped air.
Additional Information

Additional Information:

• Delivery Time: 1
• Packaging Details: bukket

Product Details:

Product DescriptionDESCRIPTION :-

TECHSEAL RDL 910/911 are two component sealant based on ‘THIOKOL’ – Polysulphide liquid elastomer. It consists of a ‘base’ compound and ‘accelerator’ (Curing Agent). When the two components are mixed together prior to application, a chemical reaction is initiated which cures instantly to a firm, flexible rubber like seal with excellent adhesion to concrete, masonry, wood, glass, acrylic and PVC plastics. It is capable of withstanding repeated extension, compression & cyclic movements without the loss of adhesion and resists deterioration by weathering, sunlight, ozone, water, salt, oils and fuels. It is far superior to all the conventional joint sealing material like bitumen, mastics, metallic channels and expansion sheets.                                                RDL-910 (Gun Grade) is a non-sag material used for sealing of horizontal, vertical & ceiling joints   
                                                                                                RDL-911 (Pour Grade) is a pourable & self leveling material used for sealing of horizontal joints only.

Additional Information:

• Delivery Time: 12 hr
• Packaging Details: drum

Product Details:

We are among the reputed organizations, highly engaged in providing an optimum quality range of Choksey Techseal 911 Polysulphide Sealant.

Additional Information:

• Production Capacity: 10 mt
• Delivery Time: same day
• Packaging Details: bukket

Product Details:

Primer RDL 942 is a specially developed product to enhance the bonding of Polysulphide Sealant -Techseal with the porous substrates such as cement, concrete, wood, asbestos, stones,bricks etc.

Features / Advantages:

• Easily applicable by brushDue to its low viscosity it penetrates deeply into the substrate
• Enhances the bonding of sealant with substrates
• It remains unaffected by UV rays and weathering conditions